Owosso Tractor Parts
www.owossotractorparts.com
1-888-530-4554

January 11, 2008
Rebuilt motor for a customer.

John Deere 2640
D-4276 Non-Turbo
 D=Diesel, 4=4 Cylinder, 276=Cu.In.
D-4276 Diesel

I had fun with this one folks.
List:
Complete Overhaul Included:

New Crankshaft, old crank had several heat cracks and was seized on No#3 Connecting Rod
Complete Engine Overhaul Kit Maxi-Force
Pistons, Rings, Wrist Pins
4 Wrist Pin Bushings
Sleeves
Rings
Rod & Main Bearings
Full Gasket Set
Balancer Shaft Bearings
(4) Reconditioned Connecting Rod
New Crankshaft
Valve Job
(2) Push Rods (customers were bent)
4 Rebuilt Injectors
10 Quarts John Deere Break-in Engine Oil
John Deere Oil Filter

Reworked Items:
Block was out of Alignment where the crankshaft sits in the main journals.
 Align-bored was off .0003 vs .0005
#3 Connection Rod was seized to the crankshaft
Reconditioned Cylinder Head
Block Hot Tanked & Magna-Fluxed for cracks
Injection Pump did not need servicing.
Engine oil pump was within specs.
Rebuilt Clutch & Pressure Plate Kit with Bearings

Owosso Tractor Parts
6990 W. M21
Owosso, MI 48867
1-888-530-4554
sales@owossotractorparts.com
bobscorner@owossotractorparts.com

All Rights Reserved @2008